How To String a Lacrosse Goal: Details Guidelines

When you are a beginner lacrosse player, you must master the basic skills of the game. Passing is one of the most important skills in lacrosse, but the most important is learning how to string a lacrosse goal.

Stringing a lacrosse goal can seem tricky especially when you have a huge net that can be even bigger than you, that you can fold over the goal. Interestingly, Utilizing simple devices, this inconvenient designation turned out to be simple, safe, and fast.

More importantly, there is no one way to stringing a lacrosse goal. Depending on the video or guide you find, there are two ways to do this – through a speed lacing strategy or a zip lacing technique. Which is better?

The velocity binding strategy is in the real sense of tying the thread around the network and the target or tape attached to it. It looks like you’re repeating the chain around the two articles. Then again, the zip tying technique involves tying a knot for each circle you make. The second option is more secure because you have nodes involved. However, it is not the fastest technology.

How To String A Lacrosse Goal

Required materials and tools:

  • Goal
  • Net
  • Zip ties
  • String or a strong thread

Stringing a Lacrosse Goal an Expert Guide

1. Start by setting up your network and target. Make sure the target is standing straight. Undo the net and twist it to the sides. You will see that the suspension is basically not enough because the net will slide slowly unless you slide the corner through a hole in the net.

2. This is where zip links will come in handy. Is it correct to say you’re wondering why it’s optional? It’s optional because you don’t require them to link a grid, but it’s useful so the grid doesn’t fall off while you’re linking it to the post.

3. Utilizing the zip ties, put one end of it through the grid and the shaft. Join it to the other end of a zip tie and tighten it. Do the same with the top corner opposite the goal. When you put the ties on, you now know what they should look like and you simply have to circle the thread through the holes and the shaft.

4. Get a long thread and then start from one end at the top. Some individuals start in the center to ensure that they can separate the thread appropriately, but this does not make much difference in the quality and speed at which you finish.

5. To make a circle, simply put the end of the thread into the upper left corner of the shaft and then make a knot to secure the thread. Continue winding the thread through each hole and the post next to it. Make sure that each circle closes the space between the grid and the shaft.

6. Continue the entire circle until you have finished on the other end. Once you’re done, make a small tight knot similar to the one you did on the other side. Keep going down towards the bottom corner of the target.

7. When you are done with the top and the other side, this is a perfect opportunity for you to continue to the base. Try not to jump to the other side because you have to use a new chord and lose momentum at the same time.

8. When you reach the center of the goal or the intersection of the perpendiculars of the base to the ground, fold the net over it. It should fit perfectly and should take after the “V”. If it doesn’t, then at this point, you have used the wrong ending at some point.

If you used the right half of the mesh, fold it into the shaft and continue tying a circle with the thread. Do the same with each remaining side.

9. When each side of the net is secured, cut the zip ties and try to tighten the net to check if they lose their grip. If it doesn’t, you’re good at this point!


You will perform the same for all corners. That’s why this is the easiest – you can even use autopilot and circle the thread around the grid and prism without thinking. You won’t see how quickly you will have the option to wrap up!